TPI-4T Skid Injector

  • Accurate additive dosage
  • Thorough, complete blending
  • Easily transportable
  • Sturdy, solid construction
  • Available in a cart configuration

Download HTS-4T-4A Spec Sheet

Description

The TPI-4T-4A-1 utilizes Hammonds proven additive injection systems to produce military specification JP-8 jet fuel by injecting FSII, CI and SDA additives. Each additive is delivered continuously and is blended evenly at ratios from 4-2500 ppm.

Features

  • Number of additives: 3 standard, 4 optional
  • Injection Ratios: Three additives: (1) 0-1,500 PPM (2) 0-65 PPM Four additives: (1) 0-1,500 PPM (1) 0-275 PPM (2) 0-65 PPM
  • Minimum injection ratio: 10 PPM standard
  • Normal operating range: 100-1,000 GPM (378-3785 liters per minute)
  • Minimum product flow rates: 50 GPM (189.21) (minimums vary with line pressure)
  • Product temperature: 40°F to +250°F (-40°C – 121.1°C)
  • Maximum product line pressure: 125 PSI (8.8 kg/cm) (PSI max varies with injection ratios, higher pressure pumps are available as options)
  • Maximum hydrostatic pressure: 350 PSI (24.6 kg/cm)
  • Product viscosities: to 10,000 SSU
  • Products handled: oils, fuels, chemicals
  • Duty cycle: continuous
  • Fluid connections – product: 6” (15.24 cm) cam lock, additives: ¼” (.6 cm) NPT or ¾” (1.9 cm) NPT

Material of Construction

  • Fluid Motor: All hard anodized aluminum with stainless steel shaft
  • Injectors: All wetted parts 300 series stainless steel with Teflon® trim
  • Mechanical Seal: Carbon on ceramic
  • Model 800 driver

Contact a Specialist